TY - STD TI - American Association of State Highway and Transportation Officials (AASHTO) (2011). A policy on geometric design of highways and streets, 6th Edition. Washington DC ID - ref1 ER - TY - STD TI - American Association of State Highway and Transportation Officials (AASHTO) (2004). A policy on geometric design of highways and streets, 5th Edition. Washington DC ID - ref2 ER - TY - JOUR AU - Arndt, O. K. AU - Cox, R. L. AU - Lennie, S. C. AU - Whitehead, M. T. PY - 2011 DA - 2011// TI - Provision of sight distance around concrete barriers and structures on freeways and interchanges JO - Transp Res Rec VL - 2262 UR - https://doi.org/10.3141/2262-03 DO - 10.3141/2262-03 ID - Arndt2011 ER - TY - JOUR AU - Sarhan, M. AU - Hassan, Y. PY - 2012 DA - 2012// TI - Consideration of sight distance in placement of concrete barriers on horizontal curves of roads JO - Transp Res Rec VL - 1940 UR - https://doi.org/10.3141/2301-02 DO - 10.3141/2301-02 ID - Sarhan2012 ER - TY - STD TI - Mavromatis S., Psarianos B., Mertzanis F., Vardaki S (2015). Three dimensional stopping sight distance control on left turn curves of freeways overlapped with crest vertical curves. 5th International Symposium of Highway Geometric Design. Vancouver.6.2015. ID - ref5 ER - TY - STD TI - Moreno CAT., Perez VMF, Garcia A, Romero RMA (2010). Optimal 3D coordination to maximize the available stopping sight distance in two-lane roads. 4th International Symposium of Highway Geometric Design. Valencia. Spain. 6.2010. ID - ref6 ER - TY - JOUR AU - Hussein, M. AU - Sayed, T. AU - Ismail, K. AU - Van Espen, A. PY - 2014 DA - 2014// TI - Calibrating road design guides using risk-based reliability analysis. JO - J Transp Eng ASCE. VL - 140 UR - https://doi.org/10.1061/(ASCE)TE.1943-5436.0000694 DO - 10.1061/(ASCE)TE.1943-5436.0000694 ID - Hussein2014 ER - TY - STD TI - Guide to Road Design, Part 3: Geometric Design, AGRD03/09, Austroads, Sydney, NSW (Austroads 2009). ID - ref8 ER - TY - JOUR AU - Nehate, G. AU - Rys, M. PY - 2006 DA - 2006// TI - ). 3D calculation of stopping-sight distance from GPS data. JO - J Transp Eng ASCE. VL - 132 UR - https://doi.org/10.1061/(ASCE)0733-947X(2006)132:9(691) DO - 10.1061/(ASCE)0733-947X(2006)132:9(691) ID - Nehate2006 ER - TY - STD TI - Kim DG, Lovell DJ (2010). A procedure for 3-D sight distance evaluation using thin plate splines. 4th International Symposium of Highway Geometric Design. Valencia. Spain. 6.2010 ID - ref10 ER - TY - JOUR AU - Castro, M. AU - Iglesias, L. AU - Sanchez, J. A. AU - Ambrosio, L. PY - 2011 DA - 2011// TI - Sight distance analysis of highways using GIS tools. JO - Transportation Research C. VL - 19 UR - https://doi.org/10.1016/j.trc.2011.05.012 DO - 10.1016/j.trc.2011.05.012 ID - Castro2011 ER - TY - JOUR AU - Jha, M. AU - Karri, G. AU - Kuhn, W. PY - 2011 DA - 2011// TI - New three-dimensional highway design methodology for sight distance measurement JO - Transp Res Rec Transportation Research Board of the National Academies. VL - 2262 UR - https://doi.org/10.3141/2262-08 DO - 10.3141/2262-08 ID - Jha2011 ER - TY - STD TI - Mavromatis S, Palaskas S, Psarianos B (2012) Continuous three-dimensional stopping sight distance control on crest vertical curves. Advances in Transportation Studies, an international Journal. Special Issue 2012. http://host.uniroma3.it/riviste/ats/ UR - http://host.uniroma3.it/riviste/ats/ ID - ref13 ER - TY - JOUR AU - Ismail, K. AU - Sayed, T. PY - 2007 DA - 2007// TI - New algorithm for calculating 3D available sight distance. JO - J Transp Eng ASCE. VL - 133 UR - https://doi.org/10.1061/(ASCE)0733-947X(2007)133:10(572) DO - 10.1061/(ASCE)0733-947X(2007)133:10(572) ID - Ismail2007 ER - TY - JOUR AU - Ismail, K. AU - Sayed, T. PY - 2012 DA - 2012// TI - Risk-optimal highway design: methodology and case studies JO - Saf Sci VL - 50 UR - https://doi.org/10.1016/j.ssci.2012.02.001 DO - 10.1016/j.ssci.2012.02.001 ID - Ismail2012 ER - TY - JOUR AU - Ibrahim, S. E. AU - Sayed, T. AU - Ismail, K. PY - 2012 DA - 2012// TI - “Methodology for safety optimization of highway cross-sections for horizontal curves with restricted sight distance.” JO - Accident Analysis and Prevention VL - 49 UR - https://doi.org/10.1016/j.aap.2012.03.016 DO - 10.1016/j.aap.2012.03.016 ID - Ibrahim2012 ER - TY - STD TI - Olson PL, Cleveland DE, Fancher PS, Schneider LW (1984) Parameters affecting stopping sight distance. Final Report. The University of Michigan. Transport Research Institute. UMTRI 84-15. Ann Arbor, Michigan 48109. Prepared for: National Cooperative Highway Research Program. Transportation Research Board. National Research Council. http://mirlyn.lib.umich.edu/Record/004951575 UR - http://mirlyn.lib.umich.edu/Record/004951575 ID - ref17 ER - TY - STD TI - Israel Interurban Highway Design Guidelines (2012) Published in Hebrew by Israel Ministry of Transportation and National Transport Infrastructure Company. http://media.mot.gov.il/PDF/HE_TRAFFIC_PLANNING/techen-geometry.pdf UR - http://media.mot.gov.il/PDF/HE_TRAFFIC_PLANNING/techen-geometry.pdf ID - ref18 ER - TY - STD TI - Fambro DB, K Fitzpatrick, and RJ Koppa. (1997). NCHRP Report 400: Determination of Stopping Sight Distances TRB, National Research Council, Washington, DC ID - ref19 ER -